dianhua
imgboxbg

NEWS CENTER

Your location:
Homepage
/
/
/
Housing car glass steel shell maintenance knowledge

Housing car glass steel shell maintenance knowledge

(Summary description)FRP has the advantages of high mechanical strength, stable performance, corrosion resistance and light weight, low seismic consumption, good sound insulation, good processability, high strength, easy to integrate components, etc. It is widely used in the automotive industry. However, even the best materials need to be well maintained.

Housing car glass steel shell maintenance knowledge

(Summary description)FRP has the advantages of high mechanical strength, stable performance, corrosion resistance and light weight, low seismic consumption, good sound insulation, good processability, high strength, easy to integrate components, etc. It is widely used in the automotive industry. However, even the best materials need to be well maintained.

Information

FRP has the advantages of high mechanical strength, stable performance, corrosion resistance and light weight, low seismic consumption, good sound insulation, good processability, high strength, easy to integrate components, etc. It is widely used in the automotive industry. However, even the best materials need to be well maintained.

Precautions for glass steel maintenance:

Avoid contact with sharp, hard objects. If the RV collides with other objects during parking or reversing, it will cause scratches and other damage, and protective measures should be taken.

Found damage and repaired in time. Always inspect the car body. If the resin is peeled off, the scratches are deep, and the fibers are exposed, it must be repaired in time. Otherwise, the water will infiltrate and accelerate the damage.

The surface of the RV should always be kept clean. Surfaces stained with oil and other materials can be cleaned with ordinary household cleaners. Solvents with strong corrosiveness should not be used. It is also not possible to use decontamination powder or wire scrubbing to avoid scratches and affect the appearance. If the stain is difficult to remove, it can be cleaned with gasoline, kerosene, diesel and toluene, xylene, styrene, acetone, etc., but be washed immediately with water to prevent intrusion into the structure. It can also be supplemented with a tool spatula for cleaning, but use bamboo chips or plastic sheets with a hardness lower than that of FRP to avoid scratching the surface. Soft materials such as jersey, gauze, soft towels and soft foam can be used for scrubbing.

Avoid long-term exposure to the sun. A pergola should be set up at the parking lot of the RV. Long-term exposure is not good for FRP, and the color of the gel coat will also be affected.

Regular waxing and polishing. In order to make the exterior of the RV exterior bright and protect the gel coat layer, the exterior of the RV should be polished regularly. The material can be used for automotive wax or FRP special glazing wax, which can be used for two to three times, each time interval of 2 hours, to form a tough wax film on the surface of FRP. It is best to polish with a hand polisher to make the surface shine as new.

Spray paint regularly, not only to keep the appearance of the RV beautiful and to make it durable. The paint after painting has a beautiful appearance, but even if the paint is sprayed and dried after three or five years of use, the color gradually fades and loses its original luster, and the dark color is even worse than the light color. In order to maintain the appearance of the RV, when the appearance of the gel coat layer is old and scratched, the method of applying paint can be adopted. Among various paints, polyurethane and epoxy paints are preferred. Before painting, the surface of the RV should be cleaned first, remove the wax with a wax remover such as clean mold water, and grind the water with a sanding paper. The deep scratches should be embedded with epoxy putty. Apply the paint before the preliminary work according to the paint requirements. It is best to paint), the painted car is as beautiful as the new car.

Scan the QR code to read on your phone

Contact Us

24-hour service hotline:

sanjo

Address: Near Nanhe Bridge, 104 National Road, Jinyuan Road, Nandu Town, Liyang City (to the east of Nandu Police Station)
Tel:+86-0519-87682999

Mobile:17301495518
E-mail:
sanjo@jssqzn.com

Jiangsu Sanjo Intelligent Technology Co.,Ltd. Copyright ©  2019 All rights reserved      苏ICP备16061118号-1 

 Powered by:www.300.cn